THE COATING AND THE POWER BEHIND IT!!

EnviroBuilt Systems Outside Wall Coatings called “Enviro-Crete” provides a protective weathering membrane in a pre-colored, durable, fade and mildew resistant concrete based elastic coating. The highest levels of Acrylic Polymers ensure un-matched resistance to surface cracking unlike standard finishes.

An unlimited selection of 80 plus colors in many distinct aggregate choices create a wide variety of texture opportunities from the heaviest southwest Mornco to the more contemporary sand finish.

EnviroBuilt Systems Outside Wall Coatings called “Enviro-Crete” provides a protective weathering membrane in a pre-colored, durable, fade and mildew resistant concrete based elastic coating. The highest levels of Acrylic Polymers ensure un-matched resistance to surface cracking unlike standard finishes.

• Enviro-Crete is a water-based material – easy clean up while wet with soap and water.
• Enviro-Crete is safe, similar to water base latex paint.
• Enviro-Crete is class “A” fire rated – will not propagate flame / fire.
• Enviro-Crete is comprised of “100% Acrylic” polymer – best exterior performance.
• Enviro-Crete is manufactured in the United States of America.
• Enviro-Crete is easy to apply by trowel, or appropriate spray equipment.
• Enviro-Crete is available in twenty (20) standard colors; over 80 generated special colors.
• Enviro-Crete Uses include renovation, repair and new construction.
• Enviro-Crete Wash ability – Cured Enviro-Crete can be cleaned with hot water and soap or pressure washing.
• Enviro-Crete is chemical resistant against mineral spirits, paint thinner, muriatic acid, etc…
• Enviro-Crete can be painted with any exterior acrylic latex paint or at a later point in time to change the color if desired. Designs can also be painted over Enviro-Crete after drying.
• Enviro-Crete Applications applies to most common concrete construction surfaces.
• Enviro-Crete Provides a noise reduction coefficient reducing decibel levels when applied to interior walls including restaurants, movie theaters, shopping centers, office buildings, etc..
• Enviro-Crete makes heavy maintenance a thing of the past – Wash walls with appropriate power washer or by hand as required.
• Enviro-Crete has outstanding color consistency & color retention and is never-fade.
• Enviro-Crete Is competitively priced to common coatings that cannot perform the same way.
• Enviro-Crete has unlimited textures opportunities in many different sized aggregate choices.
• Enviro-Crete Maintains outstanding quality control and consistency in Enviro-Crete production.
• Enviro-Crete  is Building Code Compliant.
• Enviro-Crete is a breathable membrane-10-20 perms average (H2O vapor transmission)
• Enviro-Crete can be either field applied or prefabricated (panelized).
• Enviro-Crete  Dries in 4-6 hours, complete cure in approximately 1 week.
• Enviro-Crete  Provides outstanding hiding power against shadowing from substrate below.
• Enviro-Crete has outstanding resistance to Environmental impact: freeze & thaw cycles, salt spray, wind driven rain, abrasion & chemical resistance, color retention, UV radiation.
• Enviro-Crete Finish- resists mold & mildew growth.