THE COATING AND THE POWER BEHIND IT!!
EnviroBuilt Systems Outside Wall Coatings called “Enviro-Crete” provides a protective weathering membrane in a pre-colored, durable, fade and mildew resistant concrete based elastic coating. The highest levels of Acrylic Polymers ensure un-matched resistance to surface cracking unlike standard finishes.
An unlimited selection of 80 plus colors in many distinct aggregate choices create a wide variety of texture opportunities from the heaviest southwest Mornco to the more contemporary sand finish.
Enviro-Crete
- Is a water-based material – easy clean up while wet with soap and water.
- Is safe, similar to water base latex paint.
- Is class “A” fire rated – will not propagate flame / fire.
- Is comprised of “100% Acrylic” polymer – best exterior performance.
- Is manufactured in the United States of America.
- Is easy to apply by trowel, or appropriate spray equipment.
- Is available in twenty (20) standard colors; over 80 generated special colors.
- Uses include renovation, repair and new construction.
- Wash ability – Cured Enviro-Crete can be cleaned with hot water and soap or pressure washing.
- Is chemical resistant against mineral spirits, paint thinner, muriatic acid, etc…
- Can be painted with any exterior acrylic latex paint or at a later point in time to change the color. Designs can also be painted over Enviro-Crete after drying.
- An application applies to most common concrete construction surfaces.
- Provides a noise reduction coefficient, reducing decibel levels when applied to interior walls including restaurants, shopping centers, office buildings, etc..
- Makes heavy maintenance a thing of the past – Wash walls with appropriate power washer or by hand as required.
- Has outstanding color consistency & color retention and is never-fade.
- Is competitively priced to common coatings that cannot perform the same way.
- Has unlimited textures opportunities in many different sized aggregate choices.
- Maintains outstanding quality control and consistency in Enviro-Crete production.
- Is Building Code Compliant?
- Is a breathable membrane-10-20 perms average (H2O vapor transmission)
- Can be either field applied or prefabricated (panelized).
- Dries in 4-6 hours, complete cure in approximately 1 week.
- Provides outstanding hiding power against shadowing from substrate below.
- Has outstanding resistance to Environmental Impact: freeze & thaw cycles, wind driven rain, abrasion & chemical resistance, color retention, UV radiation.
- Finish- resists mold & mildew growth.